STM32 Board NUCLEO XNUCLEO-F030R8 STM32F030R8T6 32-Bit ARM Cortex M0 Development Board Support Original NUCLEO-F030R8

$22.99
In stock
Fast shipping
Shop:Development Board Store
  • Brand Name: Waveshare
  • Demo Board Type: Others
  • Model Number: XNUCLEO-F030R8
  • Arduino compatibility: UNO, Leonardo
  • Arduino ICSP interface: Yes
  • USB connector: Micro USB
  • Morpho headers mark: Most
  • Common interfaces are connected via: Jumpers
  • UART debugging: Available while in-circuit debugging
  • USB fuse: Yes (500mA)
  • Button position: Close to Arduino connector
  • onboard Cortex-M0 microcontroller: STM32F030R8T6
  • Model Name: XNUCLEO-F030R8 STM32 Board

  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 20cm x 18cm x 10cm (7.87in x 7.09in x 3.94in)


STM32 Board NUCLEO XNUCLEO-F030R8 STM32F030R8T6 32-Bit ARM Cortex M0 Development Board Support Arduino Original NUCLEO-F030R8 STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F030R8 Features Compatible with NUCLEO-F030R8, onboard Cortex-M0 microcontroller STM32F030R8T6 Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion Supports mbed, build prototype quickly by mbed SDK and online tools Comprehensive free software HAL library including a variety of software examples Comes with a separated ST-LINK/V2 module Advantages Compare XNUCLEO NUCLEO Remarks Arduino compatibility UNO, Leonardo UNO XNUCLEO can be configured by jumper to compatible with UNO (default) or Leonardo Arduino ICSP interface Yes None ICSP is required by certain kinds of shields USB connector Micro USB Mini USB Micro USB is the advanced USB standard Morpho headers mark Most None Now you can check the PCB mark instead of datasheet Common interfaces are connected via Jumpers 0Ω resistors Jumpers are much easier to use, need no soldering UART debugging Available while in-circuit debugging Not available while in-circuit debugging The NUCLEO integrated ST-LINK/V2 functional chip can be simulated as serial port, however, it\'s not available while in-circuit debugging, whereas XNUCLEO features a stand-alone USB TO UART chip. 8MHz crystal Yes None Timer is more accurate when using external 8MHz crystal 32.768KHz crystal Yes None Required for RTC USB fuse Yes (500mA) None The computer USB interface might be harmed without fuse LEDs 4 1 The more LEDs, the easier to monitor program running status UART indicator Yes None Data communication is visible now DC input Yes None A convenience Button position Close to PCB edge Close to Arduino connector The button won\'t be untouchable when connecting with an Arduino shield if it were close to the PCB edge ST-LINK Separated Integrated ST-LINK can be used anywhere else Comes with USB cable Yes None What\'s on the XNUCLEO-F030R8 STM32F030R8T6
Core : ARM® 32-bit Cortex™-M0 Operating frequency : 48MHz Operating voltage : 2.4V-3.6V Package : LQFP64 Memories : 64kB Flash, 8kB SRAM Interfaces : 2 x SPI, 2 x USART, 2 x I2C AD/DA : 1 x AD (12 bit) SPX3819M5 : 3.3V voltage regulator AMS1117-5.0 : 5.0V voltage regulator CP2102 : USB to UART convertor Arduino connector : for connecting Arduino shields ICSP interface : Arduino ICSP USB TO UART : for debugging SWD interface : for programming and debugging ST Morpho headers : access to VCC, GND and all the I/Os, easy for expansion 6-12V DC input User button Reset button Power indicator User LED Serial port Rx/Tx indicator 500mA fast self-recovery fuse 8MHz crystal 32.768KHz crystal ADC/I2C selection jumper
short A and B : Arduino A4, A5 is used as I2C short B and C : Arduino A4, A5 is used as ADC UART selection jumper MCU current test jumper : for low power tests Power selection jumper
short 5V and U5V : powered from USB connection short 5V and E5V : powered from external power supply User button jumper
short the jumper to connect to I/Os used in example code open the jumper to connect to other custom pins via jumper wires User LED jumper
short the jumper to connect to I/Os used in example code open the jumper to connect to other custom pins via jumper wires XNUCLEO-F030R8 Expansion Headers XNUCLEO-F030R8 Photos
XNUCLEO-F030R8 STM32 development board
XNUCLEO-F030R8 STM32 development board back view
XNUCLEO-F030R8 STM32 development board
XNUCLEO-F030R8 STM32 development board back view
Connecting with ST-LINK/V2 (mini)
Connecting with sensors XNUCLEO-F030R8 Dimension Downloads Development resources: demo codes, schematic, datasheets, etc.
www.waveshare.com/wiki/XNUCLEO-F030R8 Package Contains XNUCLEO-F030R8 x 1 ST-LINK/V2 (mini) x 1 USB Type A Plug to Micro B Plug Cable x 1 USB Type A Plug to Receptacle Cable x 1 1 2 3 4 Customers Who Bought This Item Also Bought Terms & Conditions

 

Related products

AD Keypad 16 Push Buttons 4x4 Accessory Board Matrix Buttons Controlled ADC AD Port Keyboard
$4.99
IC Detect TEST two SOP8 test socket SOP8+SOP8 socket 208mil SOIC8 TEST SOCKET OTS-8+8(20)-1.27-01
$16.50
Waveshare 3.5inch HDMI LCD Resistive Touch Screen 480x320 High Resolution HDMI interface IPS Screen Designed for Raspberry Pi 3
$42.99
DFRobot Genuine Mini Micro DC Geared Motor, 3~9V 30mA 6V/96RPM 5V/80RPM 3V/48RPM for DIY smart Robot/Mobile platform/smart car
$4.89
STM32 Board Nucleo NUCLEO-F411RE STM32F411RE STM32 Development Board Integrate ST-LINK/V2-1 Debugger/Programmer Free Shipping
$23.99
CHIntelligent High Speed USB Programmer+QFP32 TQFP32 adapter for mega8 mega48 mega64 mega128 AVR Programmer ISP
$75.00
X6818 Development Board S5P6818 ARM Cortex-A53 Octa Core 1G DDR3 8G EMMC+ 7 Inch Capacitive LCD smartfly android linux qt ubuntu
$145.00
LED Lattice Screen Display Module 16*16 Red LED Dot Matrix Display Screen for Arduino and 51 Single Chip Microcomputer
$11.20